/mcpPurpose Command or Action if your system uses a Common Device Configuration to apply configuration options to • Add a Softkey Template to Common Device Configuration, on page 523 phones. This is the most commonly used • Associate Common Device Configuration with Phone, on page 524 method for making a softkey template available to phones. Optional. Use this procedure either as an alternative to associating the softkey template Associate Softkey Template with Phone, on page 522 Step 4 with the Common Device Configuration, or in conjunction with the Common Device Configuration. Use this procedure in conjunction with the Common Device Configuration if you need assign a softkey template that overrides the assignment in the Common Device Configuration or any other default softkey. Configure barge for built-in conference bridges. Configure Barge for Built-In Conferencing, on page 524 Step 5 Configure barge for shared conference bridges. Configure Barge for Shared Conferencing, on page 525 Step 6 Associate users with devices. Associate User with Device, on page 60 Step 7 Configure Softkey Template for Built-In Conferencing Configure a softkey template for Barge and assign the Barge softkey to that template. You can configure the Barge softkey in the Remote In Use call state. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Softkey Template. Step 2 Perform the following steps to create a new softkey template; otherwise, proceed to the next step. a) Click Add New. b) Select a default template and click Copy. c) Enter a new name for the template in the Softkey Template Name field. d) Click Save. Step 3 Perform the following steps to add softkeys to an existing template. a) Click Find and enter the search criteria. b) Select the required existing template. Step 4 Check the Default Softkey Template check box to designate this softkey template as the default softkey template. Note If you designate a softkey template as the default softkey template, you cannot delete it unless you first remove the default designation. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 520 Presence and Privacy Features Configure Softkey Template for Built-In Conferencing