/mcpProcedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Class of Control > Calling Search Space. Step 2 Click Add New. Step 3 In the Name field, enter a name. Ensure that each calling search space name is unique to the system. The name can include up to 50 alphanumeric characters and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Step 4 In the Description field, enter a description. The description can include up to 50 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), back-slash (), or angle brackets (<>). Step 5 From the Available Partitions drop-down list, perform one of the following steps: • For a single partition, select that partition. • For multiple partitions, hold down the Control (CTRL) key, then select the appropriate partitions. Step 6 Select the down arrow between the boxes to move the partitions to the Selected Partitions field. Step 7 (Optional) Change the priority of selected partitions by using the arrow keys to the right of the Selected Partitions box. Step 8 Click Save. Configure the Service Parameter for Connected Number Display Restriction The connected number display restriction restricts the connected line ID display to dialed digits only. This option addresses customer privacy issues as well as connected number displays that are meaningless to phone users. Before you begin Configure Calling Search Spaces for Call Display Restrictions, on page 547 Procedure Step 1 From Cisco Unified CM Administration, choose System > Service Parameters. Step 2 Select the server where the Cisco CallManager service runs, and then select the Cisco CallManager service. Step 3 Set the Always Display Original Dialed Number service parameter to True to enable this feature. The default value is False. Step 4 (Optional) Set the Name Display for Original Dialed Number When Translated service parameter. The default field shows the alerting name of the original dialed number before translation. You can change this parameter to show the alerting name of the dialed number after translation. This parameter is not applicable if the Always Display Original Number service parameter is set to False. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 548 Presence and Privacy Features Configure the Service Parameter for Connected Number Display Restriction