/mcpConfigure a Do Not Disturb Softkey Optional. If your phone uses softkeys, perform the tasks in the following task flow to add a Do Not Disturb softkey to the phone. Procedure Purpose Command or Action Create a softkey template that includes the Do Not Disturb softkey. Configure Softkey Template for Do Not Disturb, on page 563 Step 1 You can associate the softkey to a Common Device Configuration and then associate that Perform either of the following procedures: Step 2 • Associate a Softkey Template with a Common Device Configuration, on page 564 configuration to a group of phones, or you can associate the softkey template directly to a phone. • Associate Softkey Template with a Phone, on page 565 Configure Softkey Template for Do Not Disturb Perform these steps to configure a softkey template that includes the Do Not Disturb softkey. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Softkey Template. Step 2 Perform the following steps to create a new softkey template; otherwise, proceed to the next step. a) Click Add New. b) Select a default template and click Copy. c) Enter a new name for the template in the Softkey Template Name field. d) Click Save. Step 3 Perform the following steps to add softkeys to an existing template. a) Click Find and enter the search criteria. b) Select the required existing template. Step 4 Check the Default Softkey Template check box to designate this softkey template as the default softkey template. Note If you designate a softkey template as the default softkey template, you cannot delete it unless you first remove the default designation. Step 5 Choose Configure Softkey Layout from the Related Links drop-down list in the upper right corner and click Go. Step 6 From the Select a Call State to Configure drop-down list, choose the call state for which you want the softkey to display. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 563 Presence and Privacy Features Configure a Do Not Disturb Softkey