/mcpb) Enter a name for the Common Device Configuration in the Name field. c) Click Save. Step 3 Perform the following steps to add the softkey template to an existing Common Device Configuration. a) Click Find and enter the search criteria. b) Click an existing Common Device Configuration. Step 4 In the Softkey Template drop-down list, choose the softkey template that contains the softkey that you want to make available. Step 5 Click Save. Step 6 Perform one of the following tasks: • If you modified a Common Device Configuration that is already associated with devices, click Apply Config to restart the devices. • If you created a new Common Device Configuration, associate the configuration with devices and then restart them. Associate Common Device Configuration with Phone Before you begin Associate a Softkey Template with a Common Device Configuration, on page 564 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find and select the phone device to add the softkey template. Step 3 From the Common Device Configuration drop-down list, choose the common device configuration that contains the new softkey template. Step 4 Click Save. Step 5 Click Reset to update the phone settings. Associate Softkey Template with a Phone Perform this procedure if you have configured a softkey template with the Do Not Disturb softkey and you want to associate that softkey template to a phone. Before you begin Configure Softkey Template for Do Not Disturb, on page 563 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 565 Presence and Privacy Features Associate Common Device Configuration with Phone