McDewey

C H A P T E R 45 Private Line Automatic Ringdown • Private Line Automatic Ringdown Overview, on page 577 • Private Line Automatic Ringdown Configuration Task Flow for SCCP Phones, on page 577 • Private Line Automatic Ringdown Configuration Task Flow for SIP Phones, on page 580 • Private Line Automatic Ringdown Troubleshooting, on page 581 Private Line Automatic Ringdown Overview The Private Line Automatic Ringdown (PLAR) feature configures a phone so that when the user goes off hook (or the NewCall softkey or line key gets pressed), the phone immediately dials a preconfigured number. The phone user cannot dial any other number from the phone line that gets configured for PLAR. PLAR works with features such as Barge, cBarge, or single button Barge. If you use PLAR with a feature, you must configure the feature as described in the feature documentation, and you must configure the PLAR destination, which is a directory number that is used specifically for PLAR. Private Line Automatic Ringdown Configuration Task Flow for SCCP Phones Perform the following tasks to configure Private Line Automatic Ringdown (PLAR) on SCCP phones. Procedure Purpose Command or Action Create a partition for the PLAR destination. The only directory number that you can assign to this partition is the PLAR destination. Create Partition, on page 578 Step 1 Assign the partition to a unique CSS, and a CSS that includes the PLAR destination device. Assign Partitions to Calling Search Spaces, on page 578 Step 2 Assign the null partition and a CSS to your PLAR destination directory number. Assign Partition to the Private Line Automatic Ringdown Destination, on page 579 Step 3 Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 577