McDewey

Configure Phone As a Protected Device Before you begin Generate a Phone Feature List, on page 5 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click the phone for which you want to set secure tone parameters. The Phone Configuration window is displayed. Step 3 From the Softkey Template drop-down list in the Device Information portion of the window, choose Standard Protected Phone. Note You must use a new softkey template without supplementary service softkeys for a protected phone. Step 4 Set the Join Across Lines option to Off. Step 5 Check the Protected Device check box. Step 6 From the Device Security Profile drop-down list (in the Protocol Specific Information portion of the window), choose a secure phone profile that is already configured in the Phone Security Profile Configuration window (System > Security Profile > Phone Security Profile. Step 7 Click Save. What to do next Perform one of the following procedures: • Configure Directory Number for Secure Tones, on page 585 • Configure MGCP E1 PRI Gateway, on page 586 Configure Directory Number for Secure Tones Before you begin Configure Phone As a Protected Device, on page 585 Procedure Step 1 Locate the Association section on the Phone Configuration window. Step 2 Select Add a new DN. The Directory Number Configuration window is displayed. Step 3 Specify a directory number in the Directory Number field. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 585 Presence and Privacy Features Configure Phone As a Protected Device