/mcpProcedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Specify the appropriate filters in the Find Phone Where field to and then click Find to retrieve a list of phones. Step 3 Select the CTI remote device from the list. Step 4 Locate the Associated Remote Destinations section. Step 5 Click Add a New Remote Destination. Step 6 Enter the destination number in the Destination Number field. To use the remote destination with Cisco Jabber clients, you must configure the destination name as JabberRD. Step 7 Configure the remaining fields in the Remote Destination Information window. For more information on the fields and their configuration options, see Online Help. Step 8 Click Save. Verify Remote Destination Perform these steps to verify if the remote destination is successfully added for a user. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Specify the appropriate filters in the Find Phone Where field to and then click Find to retrieve a list of phones. Step 3 Select the CTI remote device from the list. Step 4 Locate the Associated Remote Destinations section and verify that the remote destination is available. Step 5 Click Apply Config. Note The Device Information section on the Phone Configuration window indicates when a remote destination is active or controlled by Cisco Jabber. Associate User with Device Procedure Step 1 From Cisco Unified CM Administration, choose User Management > End User. Step 2 Specify the appropriate filters in the Find User Where field to and then click Find to retrieve a list of users. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 60 Remote Worker Features Verify Remote Destination