/mcpLog In to Cisco Unified CM Administration Use the following procedure to log in to Cisco Unified Communications Manager Administration. After you log in to Cisco Unified Communications Manager Administration, messages may display that indicate the current state of licenses for Unified Communications Manager in the main window. For example, Unified Communications Manager may identify the following situations: • Unified Communications Manager currently operates with starter (demo) licenses, so upload the appropriate license files. • Unified Communications Manager currently operates with an insufficient number of licenses, so upload additional license files. • Unified Communications Manager does not currently use the correct software feature license. In this case, the Cisco CallManager service stops and does not start until you upload the appropriate software version license and restart the Cisco CallManager service. Use the following procedure to browse into the server and log in to Cisco Unified CM Administration. Procedure Step 1 Start your preferred operating system browser. Step 2 In the address bar of the web browser, enter the following case-sensitive URL: https://<Unified CM-server-name>:{8443}/ccmadmin/showHome.do where: <Unified CM-server-name> equals the name or IP address of the server Note You can optionally specify a port number. Step 3 A Security Alert dialog box displays. Click the appropriate button. Step 4 At the main Cisco Unified CM Administration window, enter the username and password that you specified during Unified Communications Manager installation and click Login. (If you want to clear the content of both fields, click Reset.) Note For security purposes, Cisco Unified Communications Manager Administration logs you out after 30 minutes of inactivity, and you must log back in. Cisco Unified Communications Manager Serviceability Some procedures in this guide require you to use the Cisco Unified Serviceability application to start or restart services on the Unified Communications Manager nodes. Cisco Unified Serviceability is a web-based troubleshooting tool that provides the following functionality: • Saves alarms and events for troubleshooting and provides alarm message definitions. • Saves trace information to log files for troubleshooting. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 8 Getting Started Log In to Cisco Unified CM Administration