/mcpHeadset and Accessories Template Management You can assign headset and accessories templates to user profiles in Cisco Unified Communications Manager to configure default headset settings for your users. The headset and accessories template provides the option to associate User Profiles. Unified Communications Manager supports the following types of headset and accessories templates: Standard Default Headset Configuration Template This is the system default template that contains the factory default settings for all headset and accessories model series. This template contains the headset or accessories settings supported by the latest headset or accessories firmware installed on your system for all your headset or accessories model series. You cannot edit the default settings though you can change the profile configuration setting. The Standard Default Headset Configuration template is created only when the Cisco Headset Service is activated in the Cisco Unified Serviceability user interface. Note By default, all User Profiles are associated to the standard headset template unless the administrator associates these user profiles to any of the custom defined headset templates. You can make copies of the standard default headset template to create custom template with customized values of the parameters including the headset or accessories firmware version. System Generated Custom Headset Template For some earlier releases that did not support the full Cisco Headset Serviceability feature, administrators could configure and deploy headset and accessories templates manually via the defaultheadsetconfig.json configuration file and TFTP. If you used this method on a previous release, and then upgrade to this release, the config file is converted to the System Generated Custom Headset Template and displays in the Headset and Accessories Configuration Template window. Following the upgrade, users and devices that used the config file are associated to this custom template. Custom Headset Configuration Template From Cisco Unified CM Administration, use the Device > Headset and Accessories > Headset and Accessories Template window to customize headset and accessories templates as per your deployment needs. You can assign different headset parameters to different models in the same template. You can also assign different firmware loads to different headset or accessories models. The custom headset or accessories settings can be assigned to specific sets of users by associating the User Profile(s) to the Custom Headset Template. Table 63: Headset and Accessories Configuration Template Settings Description Field Headset and Accessories Template Configuration Enter a unique name to identify the headset and accessories template. Name Enter a description that identifies use of the template. Description Model and Firmware Settings Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 678 Device Management Headset and Accessories Template Management