/mcpStep 7 Set the Transport Type to TLS. Step 8 Leave the TFTP Encrypted Config check box unchecked for the following phones as Mobile and Remote Access will not work for these phones with this option enabled: DX Series, IP Phone 7800, or IP Phone 8811, 8841, 8845, 8861 and 8865 Step 9 Complete the remaining fields in the Phone Security Profile Configuration window. For more information on the fields and their configuration options, see Online Help. Step 10 Click Save. Note You must apply this profile to the Phone Configuration for each of your Mobile and Remote Access endpoints. Configure Mobile and Remote Access Access Policy for Cisco Jabber Users Use this procedure to set up an Mobile and Remote Access Access Policy for Cisco Jabber users. Cisco Jabber users must be enabled with Mobile and Remote Access access within their user profiles in order to use the Mobile and Remote Access feature. The minimum Expressway release for Mobile and Remote Access Policy support with Cisco Jabber is X8.10. The Mobile and Remote Access Policy is not required for non-Jabber users. For more information on user profiles, see "User Profile Overview" section in System Configuration Guide for Cisco Unified Communications Manager. Note Procedure Step 1 From Cisco Unified CM Administration, choose User Management > User Settings > User Profile. Step 2 Click Add New. Step 3 Enter a Name and Description for the user profile. Step 4 Assign a Universal Device Template to apply to users' Desk Phones, Mobile and Desktop Devices, and Remote Destination/Device Profiles. Step 5 Assign a Universal Line Template to apply to the phone lines for users in this user profile. Step 6 If you want the users in this user profile to be able to use the self-provisioning feature to provision their own phones, do the following: a) Check the Allow End User to Provision their own phones check box. b) In the Limit Provisioning once End User has this many phones field, enter a maximum number of phones the user is allowed to provision. The maximum is 20. c) Check the Allow Provisioning of a phone already assigned to a different End User check box to determine whether the user who is associated with this profile has the permission to migrate or reassign a device that is already owned by another user. By default, this check box is unchecked. Step 7 If you want Cisco Jabber users who are associated with this user profile, to be able to use the Mobile and Remote Access feature, check the Enable Mobile and Remote Access check box. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 76 Remote Worker Features Configure Mobile and Remote Access Access Policy for Cisco Jabber Users