/mcpPurpose Command or Action Tip Set up a sync schedule for automatic updates. Optional. If you want to add your wireless infrastructure from Cisco Prime Infrastructure, Insert Infrastructure Devices, on page 767 Step 3 or if you are using a third-party wireless LAN controller, use Bulk Administration to update the database from a CSV file. Note This method does not allow you to set up automatic updates. Optional. If your synchronization includes access points that you do not want to track (for Deactivate Infrastructure Device from Tracking, on page 768 Step 4 example, if the synchronization pulls in access points from a lab), you can deactivate the access point and Cisco Unified Communications Manager will not track updates to the access point. Start Services for Wireless Infrastructure Synchronization Use this procedure to start services that support synchronization with a Cisco Wireless LAN Controller in support of the Location Awareness feature. Procedure Step 1 Log in to Cisco Unified Serviceability and choose Tools > Service Activation. Step 2 From the Server drop-down list, select the publisher node. Step 3 Make sure that the following services are checked: • Cisco CallManager • Cisco AXL Web Service • Cisco Wireless Controller Synchronization Service Step 4 Optional. If you want to use Bulk Administration to import your network infrastructure from a CSV file, make sure that Bulk Provisioning Service is checked. Step 5 Click Save. Configure Wireless Access Point Controller Use this procedure to synchronize the database with a Cisco wireless access point controller. During the sync, Unified Communications Manager updates its database with the wireless access point infrastructure that the controller manages. You can add up to fifty wireless access point controllers. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 766 Advanced Call Processing Start Services for Wireless Infrastructure Synchronization