/mcpConfigure Presentation Information on SIP Trunks Use this procedure to configure the presentation name and number on SIP Trunk page. Before you begin • Check the Enable External Presentation Name and Number check box on the SIP Profile Configuration page. • Configure SIP Trunks, on page 791 Procedure Step 1 From Cisco Unified CM Administration, choose Device > Trunk. Step 2 Click Add New. Step 3 From the Trunk Type drop-down list, choose SIP Trunk. Step 4 From the Trunk Service Type drop-down list, choose the type of SIP trunk that you want to configure: • None (Default): The trunk will not be used for Call Control Discovery, Extension Mobility Cross-Cluster, Intercompany Media Engine, or IP Multimedia System Service Control. • Call Control Discovery: The trunk supports the Call Control Discovery feature. • Extension Mobility Cross Cluster: The trunk supports Extension Mobility Cross Cluster. • Cisco Intercompany Media Engine: The trunk supports the Intercompany Media Engine (IME). Make sure that the IME server is installed before you configure this type of trunk. • IP Multimedia System Service Control: Choose this option to enable the trunk with support for IP Multimedia System Service Control. Step 5 Click Next. Step 6 In the Presentation Information section, enter the name and number that you want to display on the called device. Note • Presentation Number field accepts up to 32 digits and can contain the following characters: [0-9, X, *, #, , +]. • Presentation Name field accepts a maximum of 50 characters. Step 7 (Optional) If you want to show the presentation name and number as anonymous, check the Anonymous Presentation check box. Note • By default, the Anonymous Presentation field is unchecked. • If you check the Anonymous External Presentation field: Presentation Number and Presentation Name fields are noneditable. Also, the entries from these fields disappear. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 792 Advanced Call Processing Configure Presentation Information on SIP Trunks