McDewey

• Search for an existing phone security profile • Click Add New Step 3 In the Phone Security Profile Information section, from the Device Security Mode drop-down list, choose Encrypted. Step 4 From the Transport Type drop-down list, choose TLS. Step 5 Check the Enable OAuth Authentication check box. Step 6 Click Save. Step 7 Associate the Phone Security Profile to the phone. For more information on how to apply the phone security phones, see "Apply Security Profiles to Phone" section in Security Guide for Cisco Unified Communications Manager. Note Reset your phone for the changes to take effect. Note When SIP OAuth Mode is enabled, Enable Digest Authentication and TFTP Encrypted Config options are not supported. Phones will download the TFTP config file securely over https(6971) and use the token for authentication. Configure SIP Oauth Registered Phones for MRA Mode Use this procedure to configure SIP OAuth registered phones to MRA mode. Before you begin This section is applicable from Release 14 onwards. Important Make sure your phones are configured to use Activation Codes. For more information see Set Registration Method to use Activation Codes section in System Configuration Guide for Cisco Unified Communications Manager. When using SIP OAuth over MRA , user cannot use username / password for login but have to use activation code based onboarding Note Procedure Step 1 From Cisco Unified CM Administration, choose Device > Phone. Step 2 Click Find and select the device which you want to configure for off-premises mode. Step 3 In the Device Information section, do the following: Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 802 Advanced Call Processing Configure SIP Oauth Registered Phones for MRA Mode