/mcpConfigure a Digest User Use this procedure to configure an end user as a digest user whom uses digest authentication. Devices that are associated to the user will be authenticated via the user's digest credentials. Procedure Step 1 From Cisco Unified CM Administration, choose User Management > End User. Step 2 Do either of the following: • Click Add New to create a new user. • Click Find and select an existing user. Step 3 Make sure the following mandatory fields are completed: • User ID • Last Name Step 4 In the Digest Credentials field, enter a password. End users must authenticate themselves via this password when using the endpoint. Step 5 Complete any remaining fields. For help with the fields and their settings, see the online help. Step 6 Click Save. Configure SIP Phone Secure Port Follow these steps to configure the SIP Phone Secure Port. Cisco Unified Communications Manager uses this port to listen to SIP phones for SIP line registrations over TLS. Procedure Step 1 From Cisco Unified CM Administration, choose System > Cisco Unified CM. Step 2 In the Cisco Unified Communications Manager TCP Port Settings for this Server section, specify a port number in the SIP Phone Secure Port field, or leave the field set to default. The default value is 5061. Step 3 Click Save. Step 4 Click Apply Config. Step 5 Click Ok. Restart Services Follow these steps to restart Cisco CallManager and Cisco CTL Provider services. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 817 QoS Management Configure a Digest User