McDewey

Apply Normalization or Transparency to SIP Devices You can apply a customized SIP Normalization and Transparency script, or a customized SDP Transparency Profile to a SIP phone by applying the script to the SIP Profile that is used by that device. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > SIP Profile. Step 2 Click Find and select the SIP profile to which you want to apply a script. Step 3 In the SDP Information area, from the SDP Transparency Profile drop-down list, choose a profile. Step 4 From the Normalization Script drop-down list, choose the script that you want to apply to the trunk. Step 5 (Optional) If you want to normalize specific parameters within the SIP messaging, do the following: a) Enter the Parameter Name that you want to normalize, and the Parameter Value for the value that you want to apply to the parameter. For example, you could enter a Location parameter and North Carolina as the value. b) To add additional parameters, click the (+) to create additional lines where you can enter additional parameters and values. Step 6 (Optional) If you want to produce SDI traces against the script, check the Enable Trace check box. Note Cisco recommends that you enable tracing while debugging your scripts. Step 7 Click Save. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 851 SIP Interoperability Apply Normalization or Transparency to SIP Devices