/mcpConfigure Emergency Call Routing Regulations Emergency Call Routing Regulation configured on Unified Communications Manager to acknowledge and configure the direct dial 911 route pattern in compliance with the laws. Before you begin Ensure to take a backup after you accept and configure FCC Laws for future reference. Procedure Step 1 To access the Emergency Call Routing Regulations window, perform either of the following: • From Cisco Unified CM Administration, chooseAdvanced Features > Emergency Call Routing Regulations • Click the link available in the alert notification to configure the 911 route pattern on the home page. Step 2 Check the I have read the above notification,and I have consulted my legal counsel to determine my specific obligations check box to acknowledge the notification. Step 3 Check the Take me to the 911 configuration page check box and click Submit to set up direct 911 notification if the FCC laws are applicable. You are navigated to the Route Pattern Configuration window and by default, a 911 pattern is configured in the Pattern Definition section. Step 4 Choose an appropriate gateway, route, or trunk from the Gateway/Route List drop-down list for the configured pattern. For more information on the other fields and their configurations, see Online Help. Step 5 Click Save. Note If the system installed in the US time zone where FCC laws aren't applicable, acknowledge the law and check the Disable any further notification regarding my 911 obligation check box in the Emergency Call Routing Regulations window and click Submit to disable the 911 notifications. If the laws aren't applicable, the administrator waives the notifications for future upgrades and new installations of the 911 route pattern. The configured settings get preserved for future upgrade. The alert notification disappears on the home page and the Emergency Call Routing Regulations window gets disabled. If the system has already created a 911 route pattern during upgrade or the time zone changed from non-US to US timezone then the acknowledge page is grayed out. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 887 Emergency Call Routing Regulations Configure Emergency Call Routing Regulations