/mcpDescription Message This error occurs when the file does not get found in the correct location, which is most likely due to an error in the build process. [LOCALE] Could not find /usr/local/cm/application_locale/cmservices/ipma/LocaleMaster Version.txt in order to update UnifiedCMAssistant locale information. This error occurs because of the collective result of any failure that occurs when a locale is being installed; it indicates a terminal condition. [LOCALE] Addition of <RPM-file-name> to the Unified Communications Manager database has failed! COP File Installation Guidelines Depending on your installation, you may need to install a COP file after the installation to fix a known defect, or to enable support for a custom device type that you want to use that does not ship with Unified Communications Manager. If you need to install a COP file, follow these guidelines: • Install the appropriate COP file on every node in a cluster. Perform this task before you install new software on each node in the cluster and after set up the database. • After you install a COP file, you must restart the node. • Restart Unified Communications Manager and/or the IM and Presence Service to ensure that configuration changes that are made during the COP file installation get written into the database. Install a COP File If you want to use a prebuilt Dial Plan other than the North American Numbering Plan (the system default), you must install a COP file with your dial plan. Procedure Step 1 Begin this procedure on the Unified Communications Manager publisher node. From Cisco Unified Communications OS Administration, choose Software Upgrades > Install. The Software Installation/Upgrade window appears. Step 2 In the Source field, choose Remote File System. Step 3 Configure the fields on the Software Installation/Upgrade window. See the Related Topics for more information about the fields and their configuration options. Step 4 Click Next. The window refreshes with a list of available software options and upgrades. Step 5 From the Options/Upgrades drop-down list, choose the DP COP file and click Next. The Installation File window opens and downloads the file from the FTP server. The window displays the progress of the download. Step 6 When the Checksum window appears, verify the checksum value against the checksum for the file that you downloaded. Installation Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 15 and SUs 88 Postinstallation Tasks COP File Installation Guidelines