McDewey

The Install Upgrade Patch Selection window displays. Step 8 Choose the upgrade patch to install. The system downloads, unpacks, and installs the patch and then restarts the system with the upgraded software version running. After the system restarts, the Preexisting Configuration Information window displays. Step 9 To continue the installation, choose Proceed. The Platform Installation Wizard window displays. Step 10 Choose Proceed or choose Cancel to stop the installation. If you choose Proceed, the Apply Patch window displays. Continue with the next step. If you choose Cancel, the system halts, and you can safely power down the server. Step 11 In the Apply Patch window displays, choose No. The Windows Upgrade window displays. Step 12 Choose No and perform the Configure Attended Installation, on page 53 procedure to configure the basic installation. What to do next Configure Attended Installation, on page 53 Configure Attended Installation Use this procedure to configure Unified Communications Manager and IM and Presence Service basic installation. Before you begin Attended Installation, on page 48 Procedure Step 1 In the Timezone Configuration window, choose the appropriate time zone for the server and then choose OK. The Auto Negotiation Configuration window is displayed. Step 2 The installation process allows you to automatically set the speed and duplex settings of the Ethernet network interface card (NIC) by using automatic negotiation. You can change this setting after installation. • To enable automatic negotiation, choose Yes. The MTU Configuration window is displayed. Note To use this option, your hub or Ethernet switch must support automatic negotiation. Installation Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 15 and SUs 53 Installation Methods Configure Attended Installation