McDewey

When the installation process completes, you are prompted to log in by using the Administrator account and password. What to do next If you want to install subscriber nodes, Add Subscriber Nodes, on page 58. Configure the IM and Presence Publisher Follow this procedure to configure the first server where you install IM and Presence Service software as the database publisher node for the IM and Presence cluster. Procedure Step 1 Install and configure the IM and Presence database publisher node. Step 2 Verify that the following services are running: • Cisco SIP Proxy • Cisco Presence Engine • Cisco XCP Connection Manager • Cisco XCP Authentication Service If you need to activate services, you can do it in Cisco Unified Serviceability at Tools > Service Activation. What to do next Add Subscriber Nodes, on page 58 Add Subscriber Nodes Before you install software on your subscriber nodes, you must add the subscriber nodes to the Unified Communications Manager publisher node. You must complete this task before installing subscriber nodes for either Unified Communications Manager or the IM and Presence Service. Procedure Step 1 Log in to the Unified Communications Manager publisher node. Step 2 From Cisco Unified CM Administration choose System > Server. Step 3 Add your subscriber nodes: a) Click Add New. b) From the Server Type drop-down list, choose the node type that corresponds to the install that you are completing: Unified Communications Manager Voice/Video node, or IM and Presence Service node. c) Enter the Fully Qualified Domain Name/IP Address field with a FQDN or IPv4 Address. Installation Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 15 and SUs 58 Installation Methods Configure the IM and Presence Publisher