McDewey

Configure CUCM Private Line Automatic Ring- down (PLAR) Contents Introduction Prerequisites Requirements Components Used Related Products Configuration Steps SCCP PLAR Configuration Step 1. Create a Partition for the PLAR Destination Step 2. Create a New CSS Step 3. Create a Translation Pattern Step 4. Assign the Desired Calling Search Space for the PLAR Phone SIP PLAR Configuration Step 1. Create SIP PLAR Dial Rules Step 2. Create a New Pattern Step 3. Assign the Rule to the SIP Phones Verify Introduction This document describes how to configure a Cisco IP Phone for PLAR or Hotdial with Cisco Unified Communications Manager (CUCM). Prerequisites Requirements

Cisco recommends that you have knowledge of these topics: Cisco Unified Communications Manager (CUCM) • Calling Search Space (CSS) • Partition (PT) • Translation Patterns • Session Initiation Protocol (SIP) Dial Rules • Components Used The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.