McDewey

Description Range of Values Field Name Reflects the reason for clearance for the calls that are cleared by the originating party. Unified Communications Managercurrently uses the Q.850 codes and some Unified Communications Managerdefined codes. See topics that are related to call termination cause codes for a listing. For calls that are cleared by the terminating party, this field specifies zero. In addition to the standard values that are described in Q.850, when a call is split by a feature (transfer or conference), the CDR terminates, and this field gets set to 393216. This represents a proprietary value for this field. Default - 0 0 to 129 For a list of cause code values see Call Termination Cause Codes, on page 240 origCause_value Represents the precedence level of the original leg. For MLPP, each call leg includes a precedence level. • Precedence 0 = FLASH OVERRIDE/ EXECUTIVE OVERRIDE • Precedence 1 = FLASH • Precedence 2 = IMMEDIATE • Precedence 3 = PRIORITY • Precedence 4 = ROUTINE Default - 4 0 to 4 origPrecedenceLevel Identifies the v4 IP address of the device that originates the media for the call. For Cisco Unified IP Phones, this field specifies the v4 address of the phone. For PSTN calls, this field specifies the v4address of the H.323 gateway. For intercluster calls, this field specifies the v4address of the remote phone. Default - 0. If media is not established or the address is not v4, this field equals 0. 0, Integer origMediaTransportAddress_IP Identifies the IP port number that is associated with the OrigMediaTransportAddress_IP field. Default - 0. If media is not established, this field stays 0. 0, Positive Integer origMediaTransportAddress_Port Identifies the codec type that the originator uses to transmit media. Unified Communications Manager currently uses the following payload capability values: 0, 1-16, 18-20, 25, 32, 33, 81-86. See topics related to codec types for a listing of the valid values. Default - 0. If media is not established, this field stays 0. 0, Positive Integer For a full list of codecs, see Codec Types, on page 237 origMediaCap_payloadCapability Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 216 CDR Records CDR Field Descriptions