/mcpStep 8 If you want the report in CSV format, choose CSV in the Report Format area. If you want the report in PDF format, choose PDF in the Report Format area. Step 9 Click View Report. Step 10 Click Send Report, if you want to mail the report. To send the report, perform the procedure that is described in the Mail Reports, on page 63. CAR Device Reports Results This chapter describes report output information for each device report. Gateway Detail Report Results The Gateway Detail report includes the following fields. See the table. Table 70: Gateway Detail Report Fields Description Field The date when the call went through the gateway. Date The time when the call went through the gateway. Orig. Time The time that the call terminated. Term. Time The duration, in seconds, that the call was connected. The duration specifies the difference between the Dest Connect and the Dest Disconnect times. Duration(s) The directory number from which the call was placed. Orig The directory number to which the call was originally placed. If the call was not forwarded, this directory number should match the Final Destination number. If the call was forwarded, this field contains the original destination number of the call before it was forwarded. Dest The codec code (compression or payload code) that the call originator used on its sending side during this call. This code may differ from the codec code that was used on its receiving side. Orig. Codec The codec code (compression or payload code) that the destination used on its sending side during this call. This code may differ from the codec code that was used on its receiving side. Dest. Codec Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 159 CDR Analysis and Reporting CAR Device Reports Results