/mcpDescription Range of Values Field Name Identifies the v4 IP address of the device that originates the call signaling. For Cisco Unified IP Phones, this field specifies the v4 address of the phone. For PSTN calls, this field specifies the v4address of the H.323 gateway. For intercluster calls, this field specifies the v4address of the remote Unified Communications Manager. Default - 0. If the v4 address does not exist for the originating device, this field equals 0. This field gets populated based on these rules. Integer origIpAddr Specifies a numeric string of up to 25 characters that indicates the calling party number if the calling party is identified with a directory number. If the calling party uses a blended address in the identity headers, this field contains the directory number portion of the blended address. For calls that originate at a Cisco Unified IP Phone, this field shows the extension number of the line that is used. For incoming H.323 calls, this field specifies the value that is received in the Calling Party Number field in the Setup message. This field reflects any translations that are applied to the Calling Party Number before it arrives at the Unified Communications Manager (such as translations at the gateway). For the server calls, where Unified Communications Manager originates a half call without a calling party, this field may remain empty. CallingPartyNumber could contain a SIP URI. Default - This field gets populated based on these rules. Text String callingPartyNumber Specifies the calling party login user ID. The format of this field specifies UTF_8. Default - Empty string “”. If the user ID does not exist, this field stays empty. Unicode – UTF_8 callingPartyUnicodeLoginUserID Specifies the Location field that is indicated in the ISDN release message for clearing causes that are received over ISDN signaling links. See topics that are related to call termination cause codes for a list of the valid values per Q.850. For clearing causes that are created internally by the Unified Communications Manager, this value specifies zero. Default - 0 0 to 15 For a list of cause code values see Call Termination Cause Codes, on page 240 origCause_location Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 215 CDR Records CDR Field Descriptions