McDewey

Description Range of Values Field Name For clearing causes that are received over ISDN signaling links, the ISDN release message indicates this location field. See topics that are related to call termination cause codes for a listing of the valid values per Q.850. For clearing causes that Unified Communications Manager creates internally, this value equals zero. Default - 0. If the destination cannot be reached, this field stays 0. 0 to 15 For a list of cause code values see Call Termination Cause Codes, on page 240 destCause_location Reflects the reason for the calss that the destination party cleared. See topics that are related to call termination cause codes for a listing of the valid values per Q.850. For calls that the originating party clears, this field stays zero. In addition to the standard values that are described in Q.850, when a call gets split by a feature (transfer or conference), the CDR terminates, and this field gets set to 393216. This represents a proprietary value for this field. Default - 0. If the destination cannot be reached, this field stays 0. 0 to 129 For a list of cause code values see Call Termination Cause Codes, on page 240 destCause_value Represents the destination legs precedence level. For MLPP, each call leg has a precedence level. • Precedence 0 = FLASH OVERRIDE • Precedence 1 = FLASH • Precedence 2 = IMMEDIATE • Precedence 3 = PRIORITY • Precedence 4 = ROUTINE Default - 4 0 to 4 destPrecedenceLevel Identifies the v4 IP address of the device that terminates the media for the call. For Cisco Unified IP Phones, this field designates the v4 address of the phone. For PSTN calls, this field designates the v4address of the H.323 gateway. For intercluster calls, this field shows the v4address of the remote phone. Default - 0. If the destination cannot be reached or the IP address of the destination is not v4, this field stays 0. 0, Integer destMediaTransportAddress_IP Identifies the IP port number that is associated with the DestMediaTransportAddress_IP field. Default - 0. If the destination cannot be reached, this field stays 0. 0, Positive Integer destMediaTransportAddress_Port Identifies the codec type that the terminating party uses to transmit media. Unified Communications Manager currently uses the following payload capability values: 0, 1-16, 18-20, 25, 32, 33, 81-86. See topics related to codec types for a listing of the valid values. Default - 0. If the destination cannot be reached, this field stays 0. 0, Positive Integer For a full list of codecs, see Codec Types, on page 237 destMediaCap_payloadCapability Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 220 CDR Records CDR Field Descriptions