/mcprecords do not load into the CAR database. This choice represents the default setting for the CDR Load Scheduler. Step 3 In the Load CDR & CMR area, complete the fields as described in the following table. Table 9: Load CDR and CMR Values Value Field Choose the hour and minute that you want CAR to begin loading CDR data from the CDR flat files. Time Choose the interval at which you want records that are loaded. The interval can range from every 15 minutes to every 24 hours. Loading Interval Enter the number of minutes that you want to allow CDR data to load. Depending on the size of the CDR flat files, CAR performance may degrade when CDRs load. You can limit the time that is allowed for loading, but in doing so, the possibility exists that only a portion of the CDR data will be loaded in the time that you set. Be sure to reconcile the duration limit that you place with the interval. For example, if you load CDR data every 15 minutes, the duration of loading cannot exceed 15 minutes. Duration Uninhibited loading allows you to set a time during which CDR data load continuously. CDR data does not load automatically in the duration that is specified. The CDR data loads uninhibited in the specified duration only if loading starts at the duration that is specified in the Load CDR and CMR area settings. If CDR data loading starts at an uninhibited loading interval, loading continues to the end of the uninhibited loading interval, plus the time in the duration field that is set in the Load CDR and CMR area, or until no new files to process exist. Uninhibited loading takes precedence over any values that are set for scheduled loading. If you do not want uninhibited loading of CDR data, set the From and To values at 00:00. Step 4 In the Uninhibited Loading of CDR area, complete the fields as described in the following table: Table 10: Uninhibited Loading of CDR Values Value Field Choose the hour and minute that you want continuous loading of CDR data to begin. From Choose the hour and minute that you want continuous loading of CDR data to end. To Step 5 Click Update. CAR loads CDR data based on the time, interval, and duration that you have specified. Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service. Call Reporting and Billing Administration Guide for Cisco Unified Communications Manager, Release 15 and SUs 38 CDR Analysis and Reporting Set Up CDR Load Schedule