/mcpSet Up Secure Conference Bridge The following procedure provides the tasks used to add secure conferencing to your network. Procedure Step 1 Verify that you installed and configured the CiscoCTL Client for Mixed Mode. Step 2 Verify that you configured the DSP farm security settings for Unified Communications Manager connection, including adding the Unified Communications Manager certificate to the trust store. Set the DSP farm security level to encrypted. Refer to the documentation for your conference bridge. Tip The DSP farm establishes the TLS port connection to Unified Communications Manager on port 2443. Step 3 Verify the DSP farm certificate is in the CallManager trust store. To add the certificate, use the certificate management function in the Cisco Unified Communications Operating System to copy the DSP certificate to the trusted store in Unified Communications Manager. When you have finished copying the certificate, restart the CiscoCallManager service on the server. For more information, see the Administration Guide for Cisco Unified Communications Manager and the Cisco Unified Serviceability Administration Guide. Tip Be sure to copy the certificate to each server in the cluster and restart the CiscoCallManager service on each server in the cluster. Step 4 In Unified Communications Manager Administration, configure Cisco IOS Enhanced Conference Bridge as the conference bridge type and select Encrypted Conference Bridge for device security mode. Tip When you upgrade to this release, Unified Communications Manager automatically assigns a nonsecure conference bridge security profile to Cisco IOS Enhanced Conference Bridge configurations. Step 5 Configure a minimum security level for Meet-Me Conferences. Tip When you upgrade to this release, Unified Communications Manager automatically assigns a minimum security level of nonsecure to all Meet Me patterns. Step 6 Configure packet capturing for the secure conference bridge. See the Troubleshooting Guide for Unified Communications Manager for more information. Tip Set packet capture mode to batch mode and capture tier to SRTP. Security Guide for Cisco Unified Communications Manager, Release 15 and SUs 166 Basic System Security Set Up Secure Conference Bridge