/mcpSet Up Secure Conference Bridge in Cisco Unified Communications Manager Administration To configure a secure conference bridge in Unified Communications Manager Administration, perform the following procedure. After you configure encryption for the conference bridge, you must reset Unified Communications Manager devices and restart the CiscoCallManager service. Ensure that you installed certificates in Unified Communications Manager and in the DSP farm to secure the connection between the devices. Before you begin Before You Begin Procedure Step 1 Choose Media Resources > Conference Bridge. Step 2 In the Find and List Conference Bridges window, verify that a Cisco IOS Enhanced Conference Bridge is installed and go to Set Up Secure Conference Bridge, on page 166. Step 3 If the device does not exist in the database, click Add New; go to Set Up Secure Conference Bridge in Cisco Unified Communications Manager Administration, on page 167. Step 4 In the Conference Bridge Configuration window, select Cisco IOS Enhanced Conference Bridge in the Conference Bridge Type drop-down list box. Configure the Conference Bridge Name, Description, Device Pool, Common Device Configuration, and Location settings as described in the Administration Guide for Cisco Unified Communications Manager . Step 5 In the Device Security Mode field, select Encrypted Conference Bridge. Step 6 Click Save. Step 7 Click Reset. What to do next To perform additional conference bridge configuration tasks, you can jump to the Meet-Me/Number Pattern Configuration window or the Service Parameter Configuration window by selecting the option from the Related Links drop-down list box and clicking Go. Set Up Minimum Security Level for Meet-Me Conferences To configure a minimum security level for Meet-Me conferences, perform the following procedure. Security Guide for Cisco Unified Communications Manager, Release 15 and SUs 167 Basic System Security Set Up Secure Conference Bridge in Cisco Unified Communications Manager Administration