/mcpassigned to the phone on the phone's Device Configuration page in Unified CM Administration. If the device is a Cisco phone, go to the Cisco Unified Reporting web page to confirm that database replication has a "good status" in the Unified CM Database Status report. You can also go to Real-Time Reporting Tool (RTMT) and check the Replication Status in the Database Summary page. If status shows 2, then replication is working. If the database replication status is good, reset the device. If the problem still persists, restart the TFTP service and the Cisco CallManager service from the Control Center - Feature Services web page. 8 BulkRegistrationError - An unexpected bulk registration message was received. If this occurs repeatedly, collect SDL/SDI detailed traces with "Enable SIP Keep Alive (REGISTER Refresh) Trace" under Cisco CallManager service turned on and contact the Cisco Technical Assistance Center (TAC). Error Message %UC_CALLMANAGER-5-H323Started: %[DeviceName=String][IPAddress=String] [{Optional}DeviceType=Enum][{Optional}Description=String] [{Optional}RemoteUnifiedCMServerList=String][AppID=String][ClusterID=String] [NodeID=String]: Unified CM is ready to handle calls for the indicated H.323 device. Explanation Cisco Unified Communications Manager (Unified CM) is ready to communicate with the indicated H.323 device. Note that this alarm describes the readiness of Unified CM to communicate 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 222/343