/mcpwith the indicated device but does not provide information about the state of the H.323 device (whether it is ready to communicate as well). Recommended Action Notification purposes only; no action is required Reason Code - Enum Definitions Enum Definitions - DeviceType Value Definition 61 H323_PHONE 62 H323_GATEWAY 122 GATEKEEPER 125 TRUNK Error Message %UC_CALLMANAGER-4-H323Stopped: %[DeviceName=String][IPAddress=String] [{Optional}DeviceType=Enum][{Optional}Description=String][AppID=String][ClusterID=String] [NodeID=String]: Unified CM is not ready to handle calls for the indicated H.323 device. Explanation Unified CM is not ready to handle calls for the indicated H.323 device. This could be due to Unified CM being unable to resolve the gateway name to IP address. For trunks, this alarm should only occur when a system administrator has made a configuration change such as resetting the H.323 trunk. For H.323 clients, this alarm occurrence is normal on lower-priority Unified CM nodes when a high-priority Unified CM node starts. Recommended Action If the service was stopped intentionally, no action is required. Check the domain name system (DNS) configuration for any errors in the gateway name or IP address and correct. Reason Code - Enum Definitions Enum Definitions - DeviceType Value Definition 61 H323_PHONE 62 H323_GATEWAY 122 GATEKEEPER 125 TRUNK Error Message %UC_CALLMANAGER-5-SIPStarted: %[DeviceName=String][{Optional}IPAddress=String] [{Optional}DeviceType=Enum][{Optional}Description=String][InPortNbr=UInt][OutPortNbr=UInt] 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 223/343