/mcp131 SIP_TRUNK Enum Definitions - InTransportType Value Definition 1 TCP 2 UDP 3 TLS 4 TCP/UDP Enum Definitions - OutTransportType Value Definition 1 TCP 2 UDP 3 TLS Error Message %UC_CALLMANAGER-5-SIPNormalizationScriptOpened: %[DeviceName=String][ScriptName=String] [InUseMemory=UInt][AppID=String][ClusterID=String][NodeID=String]: Unified CM has opened the script for this device. Explanation The normalization script for the indicated SIP device has been successfully loaded, initialized, and is active on Unified CM Recommended Action Notification purposes only; no action is required Error Message %UC_CALLMANAGER-5-SIPNormalizationScriptClosed: %[DeviceName=String][ScriptName=String] [ReasonCode=Enum][ReasonText=String][AdditionalInformation=String][AppID=String] [ClusterID=String][NodeID=String]: Unified CM has closed (disabled) the script for this device . Explanation Unified CM closed the script either because the indicated device (SIP trunk) was reset manually or automatically, the trunk was deleted, or because of a script error or resource error, or because of an internal error. When the script is closed, Unified CM is not invoking normalization script message handlers for the indicated SIP device. Recommended Action This alarm serves as notification of the script closure if the alarm occurred due to a SIP trunk maintenance window or some other expected reason for the script to close. If this alarm is unexpected, check for an occurrence of the SIPNormalizationScriptError alarm and refer to the specific action based on the reason code identified in that alarm. Reason Code - Enum Definitions Enum Definitions - ReasonCode Value Definition 1 DeviceResetManually - The associated device was 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 225/343