/mcpmanually reset via Cisco Unified CM Administration 2 DeviceResetAutomatically - The associated device was reset automatically; the reset was triggered by an execution error in the script 3 DeviceDeleted - The associated device was manually deleted in Cisco Unified CM Administration 4 ScriptDisassociated - A configuration change occurred in Cisco Unified CM Administration and the script is no longer associated with the device 5 ScriptInfoChanged - A change in the script logic occurred or a change to one or more fields on the SIP Normalization Script Configuration window in Cisco Unified CM Administration occurred 6 ScriptError - An error occurred in the script; check for a SIPNormalizationScriptError alarm and perform the recommended actions described to correct the script error Error Message %UC_CALLMANAGER-3-SIPNormalizationScriptError: %[DeviceName=String][ScriptName=String] [ScriptFunction=String][ScriptType=String][ErrorCode=Enum][ErrorCodeText=String] [ErrorMessage=String][ConfiguredAction=String][ResultingAction=String][InUseMemory=UInt] [MemoryThreshold=UInt][InUseLuaInstructions=UInt][LuaInstructionThreshold=UInt][AppID=String] [ClusterID=String][NodeID=String]: A script error occurred. Explanation Unified CM encountered an error during loading, initializing, or during execution of the SIP normalization script for the indicated SIP device. If the error was due to a resource issue, the SIPNormalizationResourceWarning alarm will also be issued. The Configured Action shown in this alarm may differ from the Resulting Action shown in this alarm because certain errors, such as those occurring during loading or initialization, cannot be configured. If the script closes three times within a 5/24/26, 3:34 AM System Error Messages for Cisco Unified Communications Manager 15 - Cisco https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/err_msgs/15_x/ccmalarms15.html 226/343