McDewey

Open Call lineOpen for the deviceID of the line. 3. Call lineDevSpecific with a CciscoLineDevSpecificSetIPv6AddressAndMode message in the lpParams parameter to specify IPv6 address and the IP Addressing mode as IPv6. Class Detail class CciscoLineDevSpecificSetIPv6AddressAndMode: public CCiscoLineDevSpecific { public: CciscoLineDevSpecificSetIPv6AddressAndMode() : CCiscoLineDevSpecific(SLDST_USER_SET_IPv6_ADDRESS_AND_MODE), m_ReceivePort(-1), m_IPAddressMode( (IpAddressingMode) 1) { } virtual ~ CciscoLineDevSpecificSetIPv6AddressAndMode() { } char m_ReceiveIPv6Address[16]; DWORD m_ReceivePort; IpAddressingMode m_IPAddressMode; virtual DWORD dwSize(void) const { return sizeof(*this) -4; } // subtract out the virtual function table pointer }; Parameters DWORDm_MsgType Equals SLDST_USER_SET_IPv6_ADDRESS Charm_ReceiveIPv6Address[16] User has to specify the IPv6 address to register the CTI Port with DWORDm_ReceivePort This specifies the port number for the user to register the CTI Port. Intm_IPAddressMode This specifies the Addressing mode with which user wants the CTI Port/RP registered. Set RTP Parameters for IPv6 Calls Use CciscoLineDevSpecificSetRTPParamsForCallIPv6 class to set the RTP parameters for calls for which you must specify IPv6 address. Be aware that this extension is available only if extension version 0x00090000 or higher is negotiated. Note Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 378 Cisco Device-Specific Extensions Class Detail