McDewey

Direct Transfer on Same Line Precondition: same as above usecase TAPI structures TAPI messages Action Lines are Enumerated LineInitializeEx LineOpen() returns Success Open all Lines (A, A', A'' and C) LineOpen() with ExtVer-0x000C0000 Make Call between C and A1[Remote Destinaton], either normal incoming or DVO call on CTI Remote Device Call Info is same above test cases Make Call between D and A1 Call Info is same above Multiple Call across lines test case Both the Calls on CTI Remote Device Drop Primary Call on CTI Remote Device : Call1 [C ' A1]: LINE_CALLSTATE -Param1 = DISCONNECTED LINE_CALLSTATE -Param1 = IDLE Secondary Call on CTI Remote Device: Call1 [A1 ' D]: LINE_CALLSTATE -Param1 = DISCONNECTED LINE_CALLSTATE -Param1 = IDLE DirectTrnasfer on the calls on CTI Remote Device Both Calls on Remote Device and call on Remote Destination drop Both the Calls on CTI Remote Device Drop Primary Call on CTI Remote Device : Call1 [C ' A1]: LINE_CALLSTATE -Param1 = DISCONNECTED LINE_CALLSTATE -Param1 = IDLE Secondary Call on CTI Remote Device: Call1 [A1 ' D]: LINE_CALLSTATE -Param1 = DISCONNECTED LINE_CALLSTATE -Param1 = IDLE DirectTrnasfer on the calls on CTI Remote Device Both Calls on Remote Device and call on Remote Destination drop CciscoLineDevSpecificDirectTransfer on the call [c ' A1] on Device A with ConsultCallID = CallID of [D ' A1] D and C will be talking/ will have Media connection Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 621 Message Sequence Charts Message Sequence Charts