McDewey

TSP Message to application data Action LineSetStatusMessages returns Success LineInserviceEvent reports to Application Line_LineDevState Dwparam1 = x040, InService LineSetStatusMessages() – with dwLinestates – 0xcc Line_Reply with Success Application sends lineDevSpecific(CciscoLineDevSpecificEnableFeatureSupport) with m_Feature – 0x00000001, m_Feature_Capability - 0x00000001 Line_Reply with Success Application sends lineDevSpecific(CCiscoLineDevSpecificSetStatusMsgs) with m_DevSpecificStatusMsgsFlag=DEVSPECIFIC_GET_IP_PORT -0x00000400 A: LINE_CALLSTATE (LINECALLSTATE_PROCEEDING) LINE_DEVSPECIFIC dwParam1 = SLDSMT_RTP_GET_IP_PORT dwParam2 = 0x00000xyy x (ninth Bit from LSB) – 0 – SetRTP (1-App has to set RTP / 0 – App need not set RTP) yy – IPAddressing Mode Note On this new Notification, applications has to Open the Port. Application calls LineMakeCall() on A dialing a Party in Cluster2 Call is routed through SIP trunk with Early Offer Enabled A: LINE_CALLSTATE (LINECALLSTATE_CONNECTED) Media will be set and Media Events will be reported to Application Other Party answers the Call Mutiple Applications Statically Register CTI Port Configuration A – CTI Port in Cluster 1 Cluster1 and Cluster2 connected via SIP trunk SIP trunk Supports Early Offer Applications: • App1 – Statically Registers CTI Port/RP with Early Offer Support • App2 – Statically Registers CTI Port/RP without Early Offer Support Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 691 Message Sequence Charts Mutiple Applications Statically Register CTI Port