/mcpExpected events Action Park Status Event on B At Step 5: Application will receive the LINE_CALLSTATE event with the Park Status = Parked. At Step 6: Application will receive the LINE_CALLSTATE event with the Park Status = Reminder. At Step 7: Application will receive the LINE_CALLSTATE event with the Park Status = Forwarded. Application will receive the LINE_CALLSTATE event with callstate IDLE. Scenario 7: 1. The Park Monitoring message flag is Enabled using SLDST_SET_STATUS_MESSAGES request for Line B(3001). 2. The Park Monitoring Forward No retrieve destination configured as self(Parkers Line) 3. A(3000) calls B(3001) 4. B(3001) receives the call and parks the call 5. The Park Monitoring Reversion Timer Expires while the call is still parked 6. The Park Monitoring Reversion Timer Expires while the call is still parked 7. The Park Monitoring Forward No Retrieve timer expires and the call is forwarded to the Parkers line. Application does a LineGetCallInfo. LineCallInfo will contain the following: hline: LH = 1 dwCallID: CallID dwReason: LINECALLREASON_PARKED dwRedirectingIDName: TransactionIDID = Sub1. dwBearerMode: ParkStatus = 6 dwCallerID: ParkDN = 5555 dwCallerName: ParkDNPartition = P1 dwcalled : ParkedParty = 3000 dwCalledIDName : ParkedPartyPartition = P1. Parked Call Exists Setup: Cisco Unified IP phones (future version) running SIP: A(3000), B(3001). B is not monitered by TSP. Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager, Release 15 and SUs 903 Message Sequence Charts Message Sequence Charts