McDewey

Routing Descriptor Blocks:

• 10.4.1.1, from 10.0.119.66, 00:26:21 ago, via Ethernet1/3 Route metric is 20, traffic share count is 1 10.2.1.1, from 10.0.119.66, 00:26:21 ago, via Ethernet1/1 Route metric is 20, traffic share count is 1 10.3.1.1, from 10.0.119.66, 00:26:21 ago, via Ethernet1/2 Route metric is 20, traffic share count is 1

ip22-75b#show ip rpf 10.1.1.1 RPF information for ? (10.1.1.1) RPF interface: Ethernet1/3 RPF neighbor: ? (10.4.1.1) RPF route/mask: 10.1.1.1/24 RPF type: unicast (ospf 1) RPF recursion count: 0 Doing distance-preferred lookups across tables

ip22-75b#show ip mroute 224.1.1.1 IP Multicast Routing Table Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT M - MSDP created entry, X - Proxy Join Timer Running A - Advertised via MSDP Timers: Uptime/Expires Interface state: Interface, Next-Hop or VCD, State/Mode

(*, 224.1.1.1), 01:30:34/00:02:59, RP 0.0.0.0, flags: DJC Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list: Ethernet1/4, Forward/Sparse-Dense, 01:30:34/00:00:00 Ethernet1/1, Forward/Sparse-Dense, 01:30:35/00:00:00 Ethernet1/2, Forward/Sparse-Dense, 01:30:35/00:00:00 Ethernet1/3, Forward/Sparse-Dense, 00:24:22/00:00:00

(10.1.1.1, 224.1.1.1), 01:30:35/00:02:59, flags: CT Incoming interface: Ethernet1/3, RPF nbr 10.4.1.1 Outgoing interface list: Ethernet1/1, Prune/Sparse-Dense, 01:30:35/00:02:32 Ethernet1/4, Forward/Sparse-Dense, 01:30:35/00:00:00 Ethernet1/2, Prune/Sparse-Dense, 00:24:22/00:02:42

After you configure the static mroute, you see in this output the RPF interface has changed to E1/1:

<#root> ip22-75b# configure terminal

Enter configuration commands, one per line. End with CNTL/Z. ip22-75b(config)# ip mroute 0.0.0.0 0.0.0.0 10.2.1.1

ip22-75b(config)#end

ip22-75b# show ip rpf 10.1.1.1