McDewey

© 2026 Cisco and/or its affiliates. All rights reserved. Page 27 of 34 Virtualization Requirements for Nutanix AHV Overview For an overview of Nutanix AHV as a supported virtualization environment, see the Introduction to Supported Virtualization Environments. ● Cisco on-premises applications are only supported with Cisco Compute Hyperconverged with Nutanix (CCHN) hardware, in deployment models HCI / Hyperconverged Node or Compute-only Node with HCI nodes. o Cisco HCI-Series, HCIX-Series o Allowed specifications of UCS C-Series, UCS X-Series, HX-Series, and (compute-only node) UCS B-Series. o For more information, see CCHN Spec Sheets for Hyperconverged Nodes and Compute-only Nodes at the link. ● Applications are NOT supported on : o FlashStack (Cisco HCI Node with external storage from Pure Storage) o 3rd-party HCI nodes o 3rd-party Compute node with HCI nodes or external storage ● You must also follow: o Any compatibility instructions from Nutanix and the hardware provider(s). o Application rules for CPU, Memory, Storage, and Network in this chapter. Application / Hypervisor Compatibility The minimum supported releases are 15 SU4/X15.4 with Nutanix AHV 10.0 / AOS 7.0 / Prism Central 2024.3. Nutanix software releases can be described as X.Y.z.n, where a single X.Y may contain several z.n. For more information, see the following link For compatibility of application releases with Nutanix AHV and AOS X.Y (for example, “10.0” or “7.0”), see each application’s Installation Guide. ● Compatible releases will be explicitly listed. ● Unlisted releases are not supported and not tested. ● See Nutanix.com for when compatible releases enter Nutanix’s release end-of-life and implications for support. Within a supported Nutanix AHV or AOS X.Y release, ● A minimum z.n release may be required for application compatibility. ● Subsequent z.n releases are compatible unless explicitly indicated otherwise.