/mcpComments Data Type Operations Parameter The type of call transfer Unity Connection will perform - supervised or unsupervised (also referred to as "Release to Switch" transfer). This requires a "TransferType" of supervised (1). • Unsupervised transfer (also referred to as "Release to Switch" transfer) - Cisco Unity Connection puts the caller on hold, dials the extension, and releases the call to the phone system. When the line is busy or is not answered, the phone system (not Cisco Unity Connection) forwards the call to the subscriber or handler greeting. To use "Unsupervised" transfer, call forwarding must be enabled on the phone system. • Supervised transfer - Cisco Unity Connection acts as a receptionist, handling the transfer. If the line is busy or the call is not answered, Cisco Unity Connection (not the phone system) forwards the call to the subscriber or handler greeting. Supervised transfer can be used regardless if the phone system forwards calls or not. Typically, TransferConfirm is used in conjunction with the call screening option ("TransferScreening" column) enabled. This combination enables the subscriber to hear the name of the caller and then decide if they want to take the call or not. Possible values: • false: Transfer confirm disabled • true: Transfer confirm enabled Default Value: false Boolean Read/Write TransferConfirm A flag indicating whether Cisco Unity Connection will check for dial tone before attempting to transfer the call. This requires a "TransferType" of supervised (1). This is usually used for phone systems that do not have "positive disconnect" capabilities to avoid sending terminated calls to the operator console. Possible Values: • false: Do not check for dial tone prior to transferring a call • true: Check for dial tone prior to transferring a call Default value: false. Boolean Read/Write TransferDtDetect The action Cisco Unity Connection will take when the extension is busy. This requires a TransferType column value = "Supervised" (1). Refer to the section Enumeration Type. Default Value is 0. Integer Read/Write TransferHoldingMode Cisco Unity Connection Provisioning Interface (CUPI) API 500 Cisco Unity Connection Provisioning Interface (CUPI) API -- Call Handler Explanation of Data Fields