/mcpComments Data Type Operations Parameter A flag indicating whether Cisco Unity Connection will say "call for <recorded name of the call handler>" when the subscriber answers the phone. Requires a "TransferType" of supervised (1).This functionality is normally used when a single extension number is being shared by multiple subscribers or a scenario where the subscriber who is the message recipient takes calls for more than one dialed extension. The introduction alerts the subscriber who answers that the call is for the call handler. Default value: false. Boolean Read/Write TransferIntroduce The number of times the extension rings before Cisco Unity Connection considers it a "ring no answer" and plays the subscriber or handler greeting. Requires a "TransferType" of supervised (1). The value of this column should never be less than 2 for a supervised transfer. Possible values: Range 2-20 Default Value: 4 Integer Read/Write TransferRings A flag indicating whether Cisco Unity Connection will prompt callers to say their names. When the phone is answered, the subscriber hears "Call from..." before Cisco Unity Connection transfers the call.Requires a "TransferType" of supervised (1). Normally this column is used along with "TransferConfirm" to allow the subscriber to screen calls. Possible Values: • false: Call screening disabled • true: Ask and record caller name Default value: false. Boolean Read/Write TransferScreening The type of call transfer Cisco Unity Connection will perform - supervised or unsupervised (also referred to as "Release to Switch" transfer). • Unsupervised transfer (also referred to as "Release to Switch" transfer) - Cisco Unity Connection puts the caller on hold, dials the extension, and releases the call to the phone system. When the line is busy or is not answered, the phone system (not Cisco Unity Connection) forwards the call to the subscriber or handler greeting. To use "Unsupervised" transfer, call forwarding must be enabled on the phone system. • Supervised transfer - Cisco Unity Connection acts as a receptionist, handling the transfer. If the line is busy or the call is not answered, Cisco Unity Connection (not the phone system) forwards the call to the subscriber or handler greeting. Supervised transfer can be used regardless if the phone system forwards calls or not. Refer to the section Enumeration Type. Default value: 0 String Read Only TransferType Cisco Unity Connection Provisioning Interface (CUPI) API 501 Cisco Unity Connection Provisioning Interface (CUPI) API -- Call Handler Explanation of Data Fields