/mcpDescription Service Parameter Specifies the port number used for RMI remote object. This port is used for AMC to exchange data with other AMC as well as with RTMT servlet. Restart the AMC service for the parameter change to take effect. Note Default setting: 1090 Minimum: 1024 Maximum: 65535 RMI Object Port Number (For AMC troubleshooting purpose only.) Enables and disables the alerting (email/epage) feature. Restart the AMC service for the parameter change to take effect. Note Default setting: True AlertMgr Enabled (For AMC troubleshooting purpose only.) Enables and disables the logging feature (CSV files for generating reports). Restart the AMC service for the parameter change to take effect. Note Default setting: True Logger Enabled Cisco Database Layer Monitor Service Specifies the hour to begin call detail recording (CDR) database maintenance. Use this parameter in combination with the Maintenance Window parameter. For example, specifying 22 in this parameter means that the CDR maintenance would begin at 10 p.m. If the Maintenance Window parameter is set to 2, it means that CDR maintenance runs every hour from 10 p.m. to midnight. If both parameters are set to 24, CDR maintenance runs every hour all day long. During CDR maintenance, the system deletes the oldest CDRs and associated call management records (CMRs). Therefore, the maximum number of records specified in the Max CDR Records parameter is maintained. Also during maintenance, the system issues an alarm if the CDR file count exceeds 200 and checks for replication links between servers that have been broken and tries to reinitialize them. Default setting: 24 Minimum: 1 Maximum: 24 Unit: hours Maintenance Time System Administration Guide 216 System Settings Service Parameters