/mcpDescription Service Parameter Specifies the maximum number of records for closed CTI providers, devices, and lines that is kept in the RIS database. After the limit specified in this parameter reaches, Cisco CTI Manager does not save any new record for unused CTI providers, devices, or lines to the RIS database. Default setting: 3000 Minimum: 0 Maximum: 5000 Unit: records RIS Maximum Number of Unused CTI Records Enables or disables Trace and Log Central throttling behavior. Default setting: True TLC Throttling Enabled Specifies the system IOWait percentage that TLC throttles towards itself. Default setting: 10 Minimum: 10 Maximum: 40 TLC Throttling IOWait Goal Specifies the system CPU utilization percentage that TLC throttles towards itself. Default setting: 80 Minimum: 65 Maximum: 90 TLC Throttling CPU Goal Specifies the minimum delay in milliseconds between IO wait and CPU usage polls for the purpose of trace collection throttling. Default setting: 250 Minimum: 200 Maximum: 2000 TLC Throttling Polling Delay Specifies the maximum time an SFTP transfer is paused in order to prevent timeouts. This is a required field. Default setting: 5000 Minimum: 1000 Maximum: 10000 TLC Throttling SFTP Maximum Delay Specifies the maximum number of Processes and Threads running on the machine. If the total number of Processes and Threads on the machine has exceeded the maximum number, SystemAccess sends TotalProcessesThreadsExceededThresholdStart alarm and the corresponding alert is generated. Default setting: 2000 Minimum: 1000 Maximum: 3000 Maximum Number of Processes and Threads Determines whether collecting and logging of troubleshooting perfmon data is enabled (True) or disabled (False). Default setting: True Enable Logging Specifies the troubleshooting perfmon data polling rate, in seconds. Default setting: 15 Minimum: 5 Maximum: 300 Unit: seconds Polling Rate System Administration Guide 220 System Settings Service Parameters