/mcpTable 3: Network Configuration Field Descriptions Description Field Ethernet Details Indicates whether DHCP is enabled for Ethernet port 0. DHCP Indicates whether the port is Up or Down for Ethernet ports 0 and 1. Status Shows the IP address of Ethernet port 0 [and Ethernet port 1 if Network Fault Tolerance (NFT) is enabled]. IP Address Shows the IP mask of Ethernet port 0 (and Ethernet port 1 if NFT is enabled). IP Mask Indicates whether an active link exists. Link Detected Displays the length of the queue. Queue Length Displays the maximum transmission unit. MTU Displays the hardware address of the port. MAC Address Displays information on received bytes, packets, and errors, as well as dropped and overrun statistics. Receive Statistics (RX) Displays information on transmitted bytes, packets, and errors, as well as dropped, carrier, and collision statistics. Transmit Statistics (TX) DNS Details Displays the IP address of the primary domain name server. Primary Displays the IP address of the secondary domain name server. Secondary Displays the configured DNS options. Optionsosadmin-3-2 Displays the domain of the server. Domain Displays the IP address of the network gateway on Ethernet port 0. Gateway Installed Software To view the software versions and installed software options, follow this procedure: Cisco Unified Communications Operating System Administration Guide for Cisco Unity Connection Release 15 11 Status and Configuration Installed Software