McDewey

© 2023 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information 9 from the CUCM TFTP server. Configurations are needed on both CUCM and voice gateway. CUCM needs to be configured first, then those configurations can be pushed to the voice gateway. ! ccm-manager sipana auto-config local GigabitEthernetx/y/z ! ccm-manager config server 172.xx.0.0 Note- Auto-Config only adds the dialpeers for each endpoint configured on CUCM. All other required SIP CLI commands need to be added. CUCM Configuration VG450 is used in this example. 1. Navigate to Device> Gateway>Add New>Gateway Type. 2. Select SIP as the protocol and click Next 3. Enter the mac address of the interface used in sip bind control.