/mcpMay 23 09:53:02.824 BR: htsp_process_event: [0/0/0:0(18), R2_Q421_IC_CLR_FWD, E_HTSP_EVENT_TIMER] May 23 09:53:02.824 BR: htsp_timer_stop May 23 09:53:02.824 BR: r2_reg_channel_disconnected(0/0/0:0(18)) May 23 09:53:02.824 BR: //23899578/92233E71B421/VTSP:(0/0/0:0):17:1:1/vtsp_cc_call_disconnected: Cause Value=16 May 23 09:53:02.824 BR: //23899578/92233E71B421/CCAPI/cc_api_call_disconnected: Cause Value=16, Interface=0xB41CEBC, Call Id=23899578
ISDN overlap-receiving Command There are implications for inbound dial-peer matching when the isdn overlap-receiving command is configured on ISDN interfaces. After every digit is received at the ISDN layer, dial-peers are checked for matches. If a full match is made, the call is routed immediately (to the session app in this case) without waiting for additional digits. The T terminator can be used to suspend this digit-by-digit matching and force the router or gateway to wait until all digits are received. The T refers to the T302 interdigit timer at the ISDN level, configurable under the serial interface associated with the ISDN interface. ISDN also provides other mechanisms to indicate the end of digits, such as setting the Sending Complete Information Element (IE) in Q.931 information messages. Empty Called Number The Warning message shown, displays when dial-peer is configured with incoming called-number T. Sample Output
Gateway(config)# dial-peer voice 1 pots Gateway(config-dial-peer)# incoming called-number T Warning: Pattern T defines a match with zero or more digits and hence could match with an empty number. If this is not the desired behaviour please configure pattern .T instead to match on one or more digits