McDewey

Command Syntax Result Command This command lists the contents of the Address Resolution Protocol table. utils network arplist [host host] [page] [numeric] This command sets an entry in the Address Resolution Protocol table. utils network arpset {host} {address} This command deletes an entry in the Address Resolution Protocol table. utils network arpdelete host Syntax Description Description Parameters Lists the contents of the address resolution protocol table. list sets an entry in the address resolution protocol table. set deletes an entry in the address resolution table. delete represents the host name or IP address of the host to add or delete to the table. host represents the MAC address of the host to be added. Enter the MAC address in the following format: XX:XX:XX:XX:XX:XX. address Displays the output one page at a time. page Displays hosts as dotted IP addresses. numeric Requirements Command privilege level: 0 Allowed during upgrade: Yes utils network capture eth0 This command captures IP packets on the specified Ethernet interface. Command Syntax utils network capture eth0 [page] [numeric] [file fname] [count num] [size bytes] [src addr] [dest addr] [port num] Syntax Description Description Parameters Specifies Ethernet interface 0. eth0 Cisco Emergency Responder Command Line Interface Guide for Release 15 115 CLI Commands utils network capture eth0