McDewey

Example To set date and time to 2:10:33 p.m. February 13, 2008: set date 14:10:33:02/13/08 set dscp This command enables or disables DSCP marking on outgoing TCP or UDP packets. You can enable or disable DSCP on a single port tag, or on all port tags at once. Command Syntax set dscp {enable | disable} {all| port_tag} Syntax Description Description Parameters Disables all DSCP port tags. all Represents a DSCP port tag, which is a string that is mapped to a TCP or UDP port to identify the application that uses the port. This value is for the portTag field displayed when you use the command show dscp defaults. The set of port tags is predefined. port_tag Command Mode Administrator (admin:) Requirements Command privilege level: 1 Allowed during upgrade: No set dscp defaults This command sets the factory default DSCP settings for all of the port tags. Command Syntax set dscp defaults Command Mode Administrator (admin:) Cisco Emergency Responder Command Line Interface Guide for Release 15 30 CLI Commands set dscp