McDewey

Description Parameters the maxFiles indicates the maximum number of log files to be created. The default value of maxFiles is 10. maxFiles num (Optional) Specifies the source address of the packet as a hostname or IPV4 address. src addr (Optional) Specifies the destination address of the packet as a host name or IPV4 address. dest addr (Optional) Specifies the port number of the packet, either source or destination. port num (Optional) Limits capture to traffic to and from a specific host. Options for protocol are IP, arp, rarp, all, and addr must be in IPv4 or hostname format. If host is used, do not provide src or dest. host protocol addr Command Modes Administrator (admin:) Requirements Command privilege level: 1 Allowed during upgrade: Yes Applies to: Unified Communications Manager, IM and Presence Service on Unified Communications Manager, and Cisco Unity Connection. utils network connectivity This command verifies the node network connection to the first node in the cluster (this connection is only valid on a subsequent node) and to a remote node. utils network connectivity [reset] [hostname/ip address] utils network connectivity [hostname/ip address] [port-number] [timeout] Syntax Description Description Parameters This command verifies the node network connection to the first node in the cluster. It is also used to check connectivity to a remote node, where there are two mandatory parameters, hostname/ip address and port-number. connectivity (Optional) Clears previous return codes. reset Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 318 Utils Commands utils network connectivity