McDewey

Command Modes Administrator (admin:) Usage Guidelines You must restart the Jetty services after enabling or disabling the standard input and output log on the Jetty server. Caution Requirements Command privilege level: 0 Allowed during upgrade: No Applies to: Cisco Unity Connection only. Enable Standard Input and Output Log on Jetty Server Example admin:set cuc jetty stdoutlog enable Command is executed successfully To effect changes restart jetty server Restart Jetty Server through Unity Connection Serviciabilty . Go to Tools -> Service Management -> Restart Connection Jetty Service. Check the logs that should not be generated after running above command. Check the requestlog by sending one voice message through webinbox. Notifications should not come in logs set cuc jetty requestlog This command enables or disables the request log getting generated from the Jetty server while any request is raised for notifications. This request log gets generated and is available at the path /usr/local/jetty/logs/. set cuc jetty requestlog {enable | disable} Syntax Description Description Parameters Enables the request log on the Jetty server. Be aware that “enable” is case sensitive. enable Disables the request log on the Jetty server. Be aware that “disable” is case sensitive. disable Command Modes Administrator (admin:) Command Line Interface Reference Guide for Cisco Unified Communications Solutions, Release 15 and SUs 79 Set Commands set cuc jetty requestlog