/mcpProcedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > Recording Profile. Step 2 Click Add New. Step 3 In the Name field, enter a name for your recording profile. Step 4 In the Recording Calling Search Space field, select the calling search space that contains the partition with the route pattern that is configured for the recording server. Step 5 In the Recording Destination Address field, enter the directory number or the URL of the recording server or the URL of the CUBE Media Proxy server. Step 6 Click Save. Configure SIP Profile for Recording Use this procedure to deliver the conference bridge identifier to the recorder and configure the SIP Profile. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Device Settings > SIP Profile. Step 2 Select the SIP profile that you want to use for your network. Step 3 Set a value for the Early Offer Support for Voice and Video calls field. SIP trunk from Unified Communications Manager to CUBE Media Proxy server must be enabled for an Early Offer support and configuration options are Best Effort (no MTP inserted) and Mandatory (insert MTP if needed). Note We recommend that you enable SIP trunk for Mandatory (insert MTP if needed). Step 4 Check the Deliver Conference Bridge Identifier check box. Step 5 Click Save. Configure SIP Trunks for Recording Use this procedure to assign the recording server information in the SIP Trunk Configuration window. Procedure Step 1 From Cisco Unified CM Administration, choose Device > Trunk. Step 2 Click Add New. Step 3 From the Trunk Type drop-down list, choose SIP Trunk. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 134 Monitoring and Recording Configure SIP Profile for Recording