/mcpDevice Protocol is auto-populated to SIP, which is the only available option. Step 4 From the Trunk Service Type drop-down list, choose the service type that you want to use in your network. The default value is None. Step 5 Click Next. Step 6 In the Destination Address field of the SIP Information pane, enter an IP address, fully qualified domain name, or DNS SRV of the recording server or CUBE Media proxy. Step 7 From the SIP Profile drop-down list in the SIP Information pane, choose the SIP profile that you want to use in your network. Step 8 From the Recording Information pane, select one of the following options: • None—This trunk is not used for recording. • This trunk connects to a recording-enabled gateway. • This trunk connects to other clusters with recording-enabled gateways. Step 9 Click Save. Note SIP trunk from Unified Communications Manager to Media Proxy must be enabled for Early Offer support in the SIP Profile that is used for this trunk. The configuration options are Mandatory (insert MTP if needed) and Best Effort (no MTP inserted). Configure Route Pattern for Recording Use this procedure to describe the route pattern configurations that are specific to recorders. You must configure a route pattern that routes to the recording server or CUBE Media Proxy server. Procedure Step 1 From Cisco Unified CM Administration, choose Call Routing > Route/Hunt > Route Pattern. Step 2 Click Add New to create a new route pattern. Step 3 Complete the fields in the Route Pattern Configuration window.For more information on the fields and their configuration options, see Online Help. Step 4 For call recording, complete the following fields: • Pattern—Enter a pattern that matches the recording destination address from the recording profile. • Gateway/Route List—Choose the SIP trunk or route list that points to the recording server. Step 5 Click Save. Configure Agent Phone Line for Recording Use this procedure to configure the agent phone line for recording. Feature Configuration Guide for Cisco Unified Communications Manager, Release 15 and SUs 135 Monitoring and Recording Configure Route Pattern for Recording